Additel 760-D

Automatic Handheld Pressure Calibrator

• Fully automatic calibrator with built-in pump and controller

• Switchable internal pressure modules for expandable ranges

• Accuracy (1 year) of 0.02%FS

• External pressure modules available (measure only)

• Less than 4 lbs (1.8 kg) for handheld operation

• Source pressure, measure pressure and electrical

• 4 channels

• Optional HART communications

• Optional data logging and task documenting

• USB, Wi-Fi, and Bluetooth communications

return to homepage | info@triwi-online.com | contact us data-sheet Catalog | Manual | Video pdf |    

 • Max Pressure Range  -12.5 to 35 psi ( -0.86 to 2.5 bar )

• Accuracy   0.02%FS[1]

• Stability  <0.005%FS[2]

• Pressure Type  Differential, Gauge

• Over Range Indication   120%

• Resolution   6 digits

• Measurement Units

 Pa, hPa, kPa, mPa, bar, mbar, psi, mmHg@0°C, cmHg@0°C, mHg@0°C, inHg@0°C, inH2O@4°C,      mmH2O@4°C, cmH2O@4°C, mH2O@4°C, mmH2O@20°C, cmH2O@20°C, mH2O@20°C,    

 inH2O@20°C, kg/m2, mtorr, torr, lb/ft2, tsi, custom

• Connection  Barb fitting

• Pressure Output Rate   <30 seconds="" 30="" inh2o="" 100="" ml="" div="">

[1] FS specification applies to the span of the module range. 
[2] Stability based on FS of the internal pressure module. Internal module is switchable. 
[1] FS specification applies to the span of the module range. 
[2] Stability based on FS of the internal pressure module. Internal module is switchable. 
 

[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules. 

[2] 0.05%FS accuracy (incl 6-month stability). One-year accuracy is 0.05%FS calibration accuracy combined with 0.05%FS one-year stability. 

[3] Specification based on gauge measurement. An additional 40 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT760-MA

 

• Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or 615 psi.a (41 bar.a)

• 0.02%FS accuracy

• Dual pressure modules

• Built-in filter and liquid trap with venting system prevents contamination of the calibrator

• Portable (16.3 lb)

ADT 912   
Low Pressure Test Pump

  • Generated pressure range -0.95 bar to +4 bar 
  • Portable only 6.2 kg
  • Insulated isothermal chamber for greater stability
  • Minimal maitenance
  • Hand-tight  quick connectors (no need for PTFE tape or spanners required) 

ADT 672 Digital Pressure Calibrator 

State of the Art Silicon Pressure Sensors

  • Pressure ranges up to 2800 bar
  • Accuracy to 0.02%
  • Measures mA or V with 24V loop power supply
  • HART communication capability
  • Data logging       

ADT 680 Digital Pressure Gauges    
 Accurate Reliable and Economic Solution 

  • Pressure ranges to 2800 bar
  • Accuracies 0.05, 0.1 & 0.25% FS
  • Environmental protection IP67
  • Data Logging and wireless versions available

ADT 681 Digital Pressure Gauges 
Advanced Microprocessor Technology

  • Pressure ranges to 2800 bar
  • Accuracy to 0.02%
  • ATEX versions available
  • Panel mounted versions available
  • Data logging 

Portable Pressure Calibrators

ADT761Automated Pressure Calibrator  

Fully Automated Portable Pressure Calibrator

  • Pressure ranges -0.95 to 41 bar
  • Gauge, differential, absolute and barometric pressure measurements
  • Accuracy 0.02% FS (barometric version 0.01% FS)
  • Integral pressure generator/controller 
  • Dual pressure modules
  • Built-in filter and liquid trap with venting system
  • Measures and sources electrical signals
  • Automated switch test
  • 24 Vdc power supply
  • HART communications
  • Documenting and logging
  • External pressure modules and manifold available

return to homepage | info@triwi-online.com | contact us data-sheet |    

                             

Ultra-low Pressure Pumps & Calibrators

Additel ADT 761-LLP 
Fully Automated Portable Calibrator

  • Pressure ranges -2.5 to 25 mbar
  • Accuracy 0.05% FS 
  • Integral pressure generator/controller 
  • Dual range pressure modules
  • Built-in filter and liquid trap with venting system
  • Measures and sources electrical signals
  • Automated switch test
  • 24 Vdc power supply
  • HART communications
  • Documenting and logging
  • External pressure modules and manifold available

homepage | info@triwi-online.com | contact us data-sheet |

Hand Pumps 

ADT 901 
Low Pressure Test Pump

  • Generated pressure range -0.4 bar to +0.4 bar
  • Insulated isothermal chamber for greater stability
  • Specially designed screw for fine adjustment
  • Hand-tight quick connectors (no need for PTFE tape or spanners required)

 

ADT 916 

Pneumatic Pressure Test Pump

  • Generated pressure range -0.95 to +40 bar
  • Portable only 2.7 kg
  • Hand-tight quick connectors (no PTFE tape or spanners required)
  • Specially designed shut-off valve for stable pressure

ADT917 

Pneumatic Pressure Test Pump

  • Generated pressure range -0.95 to +70 bar
  • Portable only 2.6 kg
  • Hand-tight quick connects (no PTFE or spanners required)
  • Specially designed shut-off valve for stable pressure

ADT 918 

Pneumatic Pressure Test Pump

  • Generated pressure range -0.95 to +100 bar
  • Portable only 2.6 kg
  • Hand-tight quick connectors (no PTFE or spanners required)
  • Specially designed shut-off valve for stable pressure

ADT 919A 

High Pressure Pneumatic Test Pump

  • Generated Pressure 0.95 to +140 bar
  • Weight 6.5 kg can be used as a portable or bench top pump
  • Hand-tight quick connectors (no PTFE or spanners required)
  • Specially designed shut-off valve for stable pressure

ADT 920 

High Pressure Pneumatic Test Pump

  • Generated pressure range -0.95 to +200 bar
  • Weight 6.5 kg can be used as a portable or bench top pump
  • Hand-tight quick connectors (no PTFE or spanners)
  • Specially designed shut-off valve for stable pressure

ADT 925 

Handheld Hydraulic Pressure Test Pump

  • Generated pressure range -0.85 to 400 bar
  • Weight 1.7 kg
  • Compatible with oil or deionized water
  • Hand-tight quick connectors (no PTFE or spanners required)

ADT 927 

Hydraulic Pressure Test Pump

  • Generated pressure range -0.85 to 700 bar
  • Weight 3.2 kg
  • Compatible with oil or deionized water
  • Hand-tight quick connectors (no PTFE or spanners required)

ADT 936 

Hydraulic High Pressure Calibration Pump

  • Generated pressure range -0.85 to 1000 bar
  • Three pressure ports
  • Compatible with oil or deionized water
  • Hand-tight quick connectors (no PTFE or spanners required)

ADT 937 

Hydraulic High Pressure Calibration Pump

  • Generated pressure -0.85 to 1000 bar
  • Three pressure ports
  • Compatible with phosphoric acid, ester fluid and skydrol
  • Hand-tight quick connectors (no PTFE or spanners required)

ADT 938 

Hydraulic High Pressure Calibration Pump

  • Generated Pressure -0.85 to 1000 bar
  • Three pressure ports
  • Oil-free, compatible with deionized water
  • Hand-tight connectors (no PTFE tape or spanners required)