KRYPTON 3xSTG

KRYPTON 3xSTG

Universal STG 10V amplifier running with sample rate that reaches up to 20 kHz per channel. Inputs are compatible with MSI adapters which can additionally support IEPE/ICP sensors, LVDTs, charge, thermocouple and more.

Analog inputs
Input channels 3
ADC type 24 bit
Sampling rate 20 kHz per channel (software selectable)
Voltage ±10 Volt to ±10 mV
Isolation voltage Differential input
Input coupling DC
Sensor Excitation 0 .. 15 Volt, max. 500mW
Bridge connection (internal completion) Full, Half, Quarter 120/350Ω 3 wire
Programmable Shunt (default Values) 100k Ohm
IEPE/ICP Sensors MSI
Resistance MSI
Temp. (PT100 to PT2000) MSI
Temp. (Thermocouple) MSI
Potentiometer YES
LVDT MSI
Charge MSI
Current External Shunt
TEDS interface YES
Advanced functions Low power, Sensor and Amplifier balance
Connector type DB9, L1B10f
Input impedance 10M Ohm
General specs
Interface LEMO 1T EtherCAT Hybrid cable (Power & Data in one cable)
Power supply voltage 6 to 50 V DC
Power consumption 2.4 W (4W 120R @ 5V load) ???
Dimensions 202x54x38 mm
Weight Typically 650 g
Environmental rating IP67
Shock & Vibration Rating > 100 g
Temperature range -40 .. 85 deg. C
Supported Software & Hardware Platforms Software: DEWESoft X 
Hardware: KRYPTON modules synchronise with all other DEWESoft Hardware

KRYPTONi 4xLV / KRYPTONi 8xLV

KRYPTON 4xLV
krypton 8xLV

Low voltage input is 100 V isolated amplifier, running with sample rate that reaches up to 20 kHz per channel. All the channels are isolated between each other and the ground.

Analog inputs
Input channels 4 (4xLV) or 8 (8xLV) isolated voltage
Input signals ±100V
Input connector BNC
Sampling rate 20kS/s per channel (software selectable)
ADC type 24 bit
Input impedance > 1 MΩ
Isolation voltage 1000 V channel/ground & channel/channel
Resolution 0.01 mV
Accuracy ±0.03% ±5mV
Gain drift over temperature typ. 10ppm/K (max. 20 ppm)
Offset drift over temperature 10µV/K
Noise 0.7mVRMS
General specs
Interface LEMO 1T EtherCAT Hybrid cable (Power & Data in one cable)
Data rate 100 MBit bus speed
Power supply voltage 6 to 50 V DC
Power consumption 2.5 Watt (4xLV), 3 Watt (8xLV)
Dimensions 4xLV: 200x50x30 mm 
8xLV: 200x50x45 mm
Weight 4xLV: Typically 650 g 
8xLV: Typically 900 g
Environmental rating IP65
Shock & Vibration Rating > 100 g
Temperature range -40 .. 85 deg. C
Supported Software & Hardware Platforms Software: DEWESoft X 
Hardware: KRYPTON modules synchronise with all other DEWESoft Hardware