high temperature data loggers -  thermocouple ThermaData® loggers

These two input ThermaData® thermocouple data loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection. Two models are available, either blind or with LCD display.

 

The Thermocouple ThermaData®data loggers measure temperature over the range of -99.9 to 1372 °C with a 0.1 °C resolution, auto-ranging to 1 °C over the range of 300 to 1372 °C. At programmable intervals the loggers will record the temperature, up to a maximum of 16000 readings or 2 x 8000 readings.

 

Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded. Each logger is supplied with a USB lead and ThermaData® Studio Software.

 

For details of the wide range of thermocouple probes available Click Here!

 

ThermaData Studio software

The ThermaData logger is connected to a PC via a serial or USB port lead. By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, storing to disc.

 

USB Connection Point

Simply remove the end cap to access the USB port. This allows the user to connect the logger to a PC via the USB lead (supplied) and upload the temperature readings collected.

 

specification

Thermocouple ThermaData® data logger

range

operating range

-99.9 to 1372 °C

-20 to +50 °C

resolution

0.1 °C to 300 °C thereafter 1 °C

accuracy

±0.4 °C ±0.1 % of reading

memory

16000 or 2 x 8000 readings

sample rate

0.1 to 255 minutes

battery

AA Tadiran - Li-SOCl

battery life

3 years @ 20 °C

display

10 mm LCD / 2 LEDs

dimensions

35 x 67 x 109 mm

weight

200 grams

 

EAN Code:5024368156006

Therma-Hygrometer - hygrometer thermometer

Hygrometer & thermometer combined or thermo hygrometer, the thermo hygrometer simultaneously displays both the humidity and temperature in addition to indicating and recording the maximum and minimum readings.

This thermo hygrometer measures both humidity and temperature over the range of -19.9 to 69.9°C and 20 to 99%rh utilising the internal sensors. Utilising the external temperature sensor the temperature range is extended to -49.9 to 69.9°C.

 

The thermo hygrometer features a temperature alert alarm that will sound when the external remote temperature probe indicates the temperature is 0°C or below. This feature is ideal for frost/freeze alert in horticulture and similar.

The thermo hygrometer is housed in an ABS case measuring 20 x 65 x 97mm, the case incorporates a useful foldaway stand and a keyhole slot for hanging on a wall.

 

specification

temperature

humidity

range - in

-19.9 to 69.9°C

20 to 99%rh

range - out

-49.9 to 69.9°C

20 to 99%rh

resolution

0.1°C/°F

1%rh

accuracy

±1°C

±5%rh

sensor type

thermistor

capacitance

battery

1.5 volt AAA

battery life

1000 hours

display

dual custom LCD

dimensions

20 x 65 x 97mm

weight

100 grams

EAN Code:5024368101556

Pro-Surface Thermapen® surface thermometer for grills and hotplates

The new Pro-Surface Thermapen® thermometer measures more accurately than an infrared thermometer the temperature of grills, cooktops, hotplates, and other surfaces. Using an using an infrared, you need to make adjustments for emissivity and distance distance. With a Pro-Surface Thermapen® you simply open the probe and take the reading - the pivoting probe and swivel tip ensure perfect surface contact and high accurate measurement.

 

The Pro Surface Thermapen has a range of -49.9 to 299.9°C and a user-selectable resolution of 0.1° or 1° and it is supplied with a FREE traceable calibration certificate. The Pro Surface Thermapen is calibrated "as a system" for better accuracy than meter and probe combinations.

 

The Thermapen® body is splash-resistant, designed for industrial use and has no buttons to press. Swing open the probe and it's on - close it and it's off. It uses no cables and the probe's fold away action offers protection when not in and eliminates the need for replacement probe purchases. For high temperature use you can order a protective silicone rubber boot for added thermal and drop protection.

 

You can customise your Thermapen even further using the  micro switches in the battery compartment.

 

specification

Pro-Surface Thermapen® thermometer

range

-49.9 to 299.9°C

resolution

0.1°C or 1°C (selectable)

accuracy

±0.4°C (-49.9 to 199.9°C) otherwise ±1°C

battery

2 x 3 volt CR2032 lithium coin cell

battery life

1500 hours

sensor type

K Thermocouple

display

14.3mm LCD

dimensions

19 x 47 x 153 mm

weight

100 grams

a FREE certificate of calibration is included

EAN Code:5024368157577

Reference Thermapen® 0.01 °C resolution, high accuracy thermometer

The Reference Thermapen® thermometer is a high accuracy PT100 instrument that is supplied with a 5-point UKAS Certificate of Calibration. Each certificate indicates deviations from standards at various check points: -18, 0, 40, 70 and 100 °C. Special ranges may be certified by arrangement with the ETI UKAS calibration laboratory.

 

The Reference Thermapen® thermometer is ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source. The instruments measure temperature over the range of -69.99 to 199.99 °C with a resolution of 0.01 °C and an accuracy of ±0.07 °C.

 

The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled if not required. Both low battery (icon) and open circuit indication are displayed, when applicable. Each Reference Thermapen® is powered by two lithium coin cell batteries with a minimum life expectancy of 1000 hours.

 

The Reference Thermapen® incorporates a stainless steel, liquid/penetration probe Ø3.3 x 108 mm, that conveniently folds back through 180 degrees into the side of the instrument when not in use. 

 

specification

Reference Thermapen® thermometer

range

-69.9 to 199.9°C

resolution

0.01°C

accuracy

±0.07°C (-30 to 149.9°C) otherwise ±0.2°C

battery

2 x 3 volt CR2032 lithium coin cell

battery life

1000 hours

sensor type

PT100

display

12mm LCD

dimensions

19 x 47 x 153 mm

weight

97 grams

a UKAS certificate of calibration is included

EAN Code:5024368156020

Reference thermometer calibration thermometer

Reference Thermometers The Reference thermometers are high accuracy PT100 instruments that are supplied with a 5-point UKAS Certificate of Calibration. Each certificate indicates deviations from standards at various check points: -18, 0, 40, 70 and 100 °C. Special ranges may be certified by arrangement with the ETI UKAS calibration laboratory.

 

The Reference thermometers are ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source. The instruments measure temperature over the range of -199.99 to 199.99 °C with a resolution of 0.01 °C and an accuracy of ±0.05 °C.

 

The units feature a simple on/off push button with open circuit 'Err' and low battery indication, when applicable. The Reference Plus thermometer incorporates the additional features of a max/min and hold function.

 

The Reference thermometers are supplied with a permanently attached, high accuracy probe incorporating a 1/10th DIN PT100 sensor. The probe measures Ø3.3 x 130 mm and is supplied with a one metre PVC lead.

 

specification

reference & reference plus thermometers

range

-199.9 to 199.9°C

resolution

0.01°C

accuracy

±0.05°C (-30 to 150°C) otherwise ±0.1°C

battery

3 x 1.5 volt AAA

battery life

2000 hours

sensor type

PT100 1/10th DIN

display

10mm LCD

dimensions

25 x 56 x 128mm

weight

210 grams

a UKAS certificate of calibration is included
EAN Code:5024368155092

Stainless Steel ThermaData® Data Loggers

Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a water resistant, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP67).

 

The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

 

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® stainless steel data logger will continue recording during and after downloading the data.

 

Five models of the stainless steel ThermaData® loggers are available, one with with internal sensor and four with optional standard fixed probe dimensions of :

  • Ø4.4 to Ø3.3 mm tip x 50 mm probe
  • Ø4.4 to Ø3.3 mm tip x 100 mm probe
  • Ø4.4 to Ø3.3 mm tip x 150 mm probe
  • Ø4.4 to Ø3.3 mm tip x 200 mm probe

 

Other probe lengths are possible - please contact our sales office for a customised quote.

 

Each logger is supplied with a two metre USB lead and ThermaData® logger software.

ThermaData® logger PC software

The ThermaData® logger is connected to a PC via the internal USB connector or a USB lead (supplied). By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The user can also set, within the software, high and low alarm values for a specific application. The information can then be analysed by zooming in, storing to disc or exporting to other software packages.

 

specification

Stainless Steel ThermaData® data logger

range

operating temperature

-20 to 105°C

-20 to 105°C

resolution

0.5°C

accuracy

±1°C (±0.5°C with calibration utility)

memory

2048 readings

sample rate

1 to 255 minutes

battery

3.6 volt half AA lithium

battery life

3 years minimum

dimensions

130 x 22mm (exc probe)

weight

45 grams

 

EAN Code:5024368156877

TempTest® 1 Smart Thermometer

TempTest 1 smart thermometers incorporate a large, easy to read 360° digital display, making the thermometer ideal for use by both right and left-handed users. Whichever way you hold it, the display will always be the right way up! The TempTest 1 gives a precise read-out of temperature over the range of -49.9 to 299.9 °C with a 0.1 °C resolution and an accuracy of ±0.4 °C (-50 to 200 °C). The thermometer will power off automatically after ten minutes, maximising battery life. This feature can be disabled.

 

TempTest® smart thermometers feature an automatic 360° display (patent pending GB2504936), which rotates in 90° increments enabling the user to read the temperature in any position ie. left hand, right hand, vertical or horizontal. This feature can be 'locked' by the user, if required.

 

The TempTest 1 thermometer is housed in a waterproof IP67 case with an ergonomic rubber seal, that include the 'Biomaster' additive to reduce bacterial growth. As well as being waterproof, it is 'probably' one of the fastest reading contact thermometers on the market today. The true temperature of a product can be measured in just three seconds.

 

Both low battery (icon) and open circuit indication are displayed, when applicable. Each TestTemp  is powered by two AAA batteries with a minimum life expectancy of 5000 hours in normal use without the backlight. The backlight function features ETI Smart Technology - only coming on when the light level requires it.

 

The TempTest 1 is supplied with an integral, permanently attached, stainless steel food penetration probe (Ø3.3 x 80 mm) with fast response tip. It includes a FREE wall bracket / scabbard to enable safe, secure and handy storage. Also available, with permanently attached hand held, fast response probe  is the TempTest 2.

 

specification

TempTest® 1

range

-49.9 to 299.9°C

resolution

0.1 °C/°F

accuracy

±0.4°C (-50 to 200 °C) otherwise ±1 °C

battery

2 x 1.5 volt AAA

battery life

5000 hours (normal use, without backlight)

sensor type

K thermocouple

display

11mm LCD

dimensions

17 x 47 x 120mm

weight

105 grams

FREE traceable certificate of calibration included

EAN Code:5024368158017

Low Cost Therma-Hygrometer thermometer & hygrometer

The 810-145 Therma-Hygrometer simultaneously displays both the humidity and temperature in addition to indicating and recording the maximum and minimum temperature and humidity readings.

The hygrometer measures both humidity and temperature over the range of 0 to 50 °C and 10 to 99%rh utilising the internal sensors.

 

This thermo-hygrometer is ideal for monitoring both temperature and humidity in rooms, offices, factories and similar to ensure optimum working conditions are maintained.

The hygro thermometer is housed in an ABS case, measuring 20 x 100 x 110mm, that incorporates a useful foldaway stand and a keyhole slot for hanging on a wall.

 

specification

temperature

humidity

range

0 to 50 °C

10 to 99%rh

resolution

0.1°C or 0.1°F

1%rh

accuracy

±1°C

±5%rh

sensor type

thermistor

capacitance

battery

1.5 volt AAA

battery life

10000 hours

display

dual custom LCD

dimensions

20 x 100 x 110mm

weight

135 grams

EAN Code:5024368157423