• OTHER CALIBRATORS (86%)

    OTHER CALIBRATORS

OTHER CALIBRATORS



kaymont m2000Sp-xr  rh CALIBRATOR

                Image result for kaymont 2000

  • Accuracy
    +/-1.0%RH (10-90%RH)**
  • Humidity range
     10-92%RH (controlled range)
  • Temperature range
    10-50C (controlled range)

cal 200 sound CALIBRATOR

                Image result for larson cal200

  • Output level: 94 or 114 dB
  • Output frequency: 1 kHz
  • 1/2” microphone opening
  • IEC 60942-1:2003 Class 1 compliant
  • Internal battery
  • Output level independent of battery condition
  • Adaptors: 1/4”, 3/8”, 1/8” microphones

starna uv-vis holminum glass

                Image result for starna uv calibration

The holmium glass filter is suitable for use as                                      a wavelength reference material in the UV and                                    visible regions of the spectrum (240 nm – 640 nm)

Starna uv-vis stray light

                UV Stray Light (Stray Radiant Energy) References (100%)

A range of liquid cut-off filters that allows                                          stray light to be checked at wavelengths                                      from 200 nm to 390 nm

SIKA FORCE calibrator

                Image result for Sika Force Calibration

  • Accuracy
    ≤ ±0,0025 %
  • Resolution (2mV / V)
    ±200 000 steps
  • Sampling rate
    Max. 50 Hz (filter = 0)

nagman flow CALIBRATOR

                 Image result for Nagman Flow calibrator

  • Sizes : from DN10 upto DN300
  • Flow Rates : From 1 to 25000 LPM
  • Lines : 1, 2 or 3 to suit or with Rotary Change Device 
  • Calibration Campaign Time : To suit, from 30 Seconds
  • Calibration Methods : Comparison / Gravimetric / Volumetric
  • Calibration Accuracies* : 0.2% upto 0.05%
  • Calibration Media : Water (Correction Factors for other liquids)





                      Hasil gambar untuk SF2001

  • Input range : 1s-99999s
  • Norminal Frequency : 5 MHz
  • Accuracy <±(1×10-7×T0+3ms)

uv-vis didymiun glass

                Image result for starna didymium

The spectrum shows 11 characteristic and well-defined                        peaks covering the wavelength range                                                from 430 nm to 890 nm

Starana uv-vis neutral desinty

                Image result for starna didymium

These references can be used to qualify the absorbance                       accuracy and linearity of visible spectrophotometers with                     a spectral bandwidth of 6.5 nm or less, over                                     the wavelength range 440 -635 nm.

Starna uv-vis absorbance

                didymium and ndf

Absorbance values, nominally 1A, are certified at                               wavelengths between the didymium peaks,                                       at 410, 455, 550, 637 and 773 nm

SIKA FORCE SENSOR

                 Force calibration sensor type FMKAL / FKAL

  • Rated force
    50 N to 5 kN (FMKAL)
    10 kN to 1000 kN (FKAL)
  • Force transfer direction
    Compression and tension
  • Accuracy class 00 / 0.5 / 1