kaymont m2000Sp-xr rh CALIBRATOR
- Accuracy
+/-1.0%RH (10-90%RH)** - Humidity range
10-92%RH (controlled range) - Temperature range
10-50C (controlled range)
cal 200 sound CALIBRATOR
- Output level: 94 or 114 dB
- Output frequency: 1 kHz
- 1/2” microphone opening
- IEC 60942-1:2003 Class 1 compliant
- Internal battery
- Output level independent of battery condition
- Adaptors: 1/4”, 3/8”, 1/8” microphones
starna uv-vis holminum glass
The holmium glass filter is suitable for use as a wavelength reference material in the UV and visible regions of the spectrum (240 nm – 640 nm)
Starna uv-vis stray light
A range of liquid cut-off filters that allows stray light to be checked at wavelengths from 200 nm to 390 nm
SIKA FORCE calibrator
- Accuracy
≤ ±0,0025 % - Resolution (2mV / V)
±200 000 steps - Sampling rate
Max. 50 Hz (filter = 0)
nagman flow CALIBRATOR
- Sizes : from DN10 upto DN300
- Flow Rates : From 1 to 25000 LPM
- Lines : 1, 2 or 3 to suit or with Rotary Change Device
- Calibration Campaign Time : To suit, from 30 Seconds
- Calibration Methods : Comparison / Gravimetric / Volumetric
- Calibration Accuracies* : 0.2% upto 0.05%
- Calibration Media : Water (Correction Factors for other liquids)
- Input range : 1s-99999s
- Norminal Frequency : 5 MHz
- Accuracy ＜±（1×10-7×T0＋3ms）
uv-vis didymiun glass
The spectrum shows 11 characteristic and well-defined peaks covering the wavelength range from 430 nm to 890 nm
Starana uv-vis neutral desinty
These references can be used to qualify the absorbance accuracy and linearity of visible spectrophotometers with a spectral bandwidth of 6.5 nm or less, over the wavelength range 440 -635 nm.
Starna uv-vis absorbance
Absorbance values, nominally 1A, are certified at wavelengths between the didymium peaks, at 410, 455, 550, 637 and 773 nm
SIKA FORCE SENSOR
- Rated force
50 N to 5 kN (FMKAL)
10 kN to 1000 kN (FKAL) - Force transfer direction
Compression and tension - Accuracy class 00 / 0.5 / 1